Total 7 equipment manager job vacancies in Engineering category in The Philippines

• Monitors and ensures all equipment is in good running condition and report status if found defective and recommends necessary solutions for the problem.
• Implements strictly the preventive maintenance of all equipment and machinery including the auxiliaries according to the hotel standards and the manufacturer’s recommendation.
• Provides prompt, courteous and efficient engineering service while implementing standard procedures for guests.

As Tooling Equipment Engineer, you will analyze all breakdown issue specially jigs related, review of jigs performance for new technology ASL and AFL 4G (BDO, Availability & PM Efficiency. ) and support the following activities; Yield control activities (SPC), Process excellence activities (Pitstop/SGA Project) and  Item qualification ( IMQF/RMMU ). And supports the establishment of in-house machine.
 
ESSENTIAL DUTIES AND RESPONSIBILITIES:
 

• Supports the establishment of In-house machine shop
• In charge in New Technology specifically in tooling related issues.
• Leads the sustenance pertaining for in-house mechanical repair and new technology
• Creation of Jigs & Fixture Sustenance Documentation - ( New and Revised)
• Plan and control all on going and incoming new technology activities
• Calculation of additional required head count
• Facilitate & Support Cost reduction, capacity and Yield Improvement
• Creates Tooling Breakdown Analysis
•  Creation and review of Tooling (BDO, Availability & PM Efficiency)
•  Recommend improvements for tooling’s based on failure analysis
•  Develop new techniques to streamline characterization process.
• Perform other duties as assigned.

Seeking a suitably qualified and reliable Mechanic (Underground Equipment – Mobile) to perform all aspects of mechanical maintenance, repair, testing, and monitoring of underground types of machinery and equipment to ensure its availability and reliability in a quality, efficient, safe, and environment-friendly manner. The role will report to the Supervisor – Mobile Maintenance (UG Equipment).

Key tasks and responsibilities:

• Complete all the necessary documentation such as work orders, and time sheets for future reference
• Communicate with others about the assigned task and discuss the outcome of the risk assessment
• Prepare a Job Action Plan and Job Hazard Analysis if required
• Check fluids such as fuel, lubricants, coolants, transmission oil, and hydraulic oils according to the manufacturer’s specifications
• Select types and grades of fluids and lubricants for the applications according to the manufacturer’s specifications and fluid capacity
• Replace fuel and oil filters and inspect for signs of contamination
• Identify types, sizes, and grades of fasteners, sealing devices, adhesives, and gaskets
• Select types of threads such as coarse and fine used for different applications
• Perform preventative maintenance of hoses, tubing, piping, and fittings by checking for deficiencies such as chafed hoses, bubbling, and leaks
• Select appropriate tools and equipment such as hydraulic presses, heating equipment, cooling equipment, seals, and bearing drivers
• Perform routine maintenance activities such as cutting, welding, heating, and cooling of materials
• Diagnose Engine and engine support systems, hydraulic, hydrostatic, and pneumatic systems, Drive train systems, Steering, Suspension, Brake System, Wheel Assemblies, and Undercarriage, Electrical and Vehicle Management Systems, and Environmental Control Systems
• Complete Timesheets timely

Seeking a suitably qualified and reliable Mechanic III (Surface Equipment-Mobile) to perform all aspects of mechanical maintenance, repair, testing, and monitoring of site mobile equipment, light, heavy and auxiliary equipment to ensure its availability, reliability, and safety in quality, efficient, safe and environment friendly manner. The role will report to the Supervisor – Mobile Maintenance (Surface-Equipment).

Key tasks and responsibilities:

• Complete all the necessary documentation such as work orders, and time sheets for future reference
• Communicate with others about the assigned task and discuss the outcome of the risk assessment
• Prepare a Job Action Plan and Job Hazard Analysis if required
• Check fluids such as fuel, lubricants, coolants, transmission oil, and hydraulic oils according to the manufacturer’s specifications
• Select types and grades of fluids and lubricants for the applications according to the manufacturer’s specifications and fluid capacity
• Replace fuel and oil filters and inspect for signs of contamination
• Identify types, sizes, and grades of fasteners, sealing devices, adhesives, and gaskets
• Select types of threads such as coarse and fine used for different applications
• Perform preventative maintenance of hoses, tubing, piping, and fittings by checking for deficiencies such as chafed hoses, bubbling, and leaks
• Select appropriate tools and equipment such as hydraulic presses, heating equipment, cooling equipment, seals, and bearing drivers
• Perform routine maintenance activities such as cutting, welding, heating, and cooling of materials
• Diagnoses Engine and engine support systems, hydraulic, hydrostatic, and pneumatic systems, Drive train systems, Steering, Suspension, Brake System, Wheel Assemblies, and Undercarriage, Electrical Vehicle Management Systems, and Environmental Control Systems
• Complete Timesheets timely

Seeking a suitably qualified and motivated Mechanic (Underground Equipment – Mobile) to perform all aspects of mechanical maintenance, repair, testing, and monitoring of underground types of machinery and equipment to ensure its availability and reliability in a quality, efficient, safe, and environment-friendly manner. Reporting to the Supervisor – Mobile Maintenance (UG Equipment).

Key tasks and responsibilities:

• Complete all the necessary documentation such as work orders, and time sheets for future reference
• Communicate with others about the assigned task and discuss the outcome of the risk assessment
• Prepare a Job Action Plan and Job Hazard Analysis if required
• Check fluids such as fuel, lubricants, coolants, transmission oil, and hydraulic oils according to the manufacturer’s specifications
• Select types and grades of fluids and lubricants for the applications according to the manufacturer’s specifications and fluid capacity
• Replace fuel and oil filters and inspect for signs of contamination
• Identify types, sizes, and grades of fasteners, sealing devices, adhesives, and gaskets
• Select types of threads such as coarse and fine used for different applications
• Perform preventative maintenance of hoses, tubing, piping, and fittings by checking for deficiencies such as chafed hoses, bubbling, and leaks
• Select appropriate tools and equipment such as hydraulic presses, heating equipment, cooling equipment, seals, and bearing drivers
• Perform routine maintenance activities such as cutting, welding, heating, and cooling of materials
• Diagnoses Engine and engine support systems, hydraulic, hydrostatic, and pneumatic systems, Drive train systems, Steering, Suspension, Brake System, Wheel Assemblies, and Undercarriage, Electrical and Vehicle Management Systems, and Environmental Control Systems
• Complete Timesheets timely

About the role

Seeking a suitably qualified and reliable Mechanic III (UG Equipment – Mobile) to perform a full range of mechanical maintenance, repair, and service activities on production equipment with considerable independent judgment in deciding with minimal supervision to ensure equipment availability in a quality, cost-efficient, environmentally, and safe manner. The role will report to the Supervisor – Mechanical Maintenance (UG Mobile Equipment).

Key tasks and responsibilities:

• Complete all the necessary documentation such as work orders, and time sheets for future reference
• Communicate with others about the assigned task and discuss the outcome of the risk assessment
• Prepare a Job Action Plan and Job Hazard Analysis if required
• Check fluids such as fuel, lubricants, coolants, transmission oil, and hydraulic oils according to the manufacturer’s specifications
• Select types and grades of fluids and lubricants for the applications according to the manufacturer’s specifications and fluid capacity
• Replace fuel and oil filters and inspect for signs of contamination
• Identify types, sizes, and grades of fasteners, sealing devices, adhesives, and gaskets
• Select types of threads such as coarse and fine used for different applications
• Perform preventative maintenance of hoses, tubing, piping, and fittings by checking for deficiencies such as chafed hoses, bubbling, and leaks
• Select appropriate tools and equipment such as hydraulic presses, heating equipment, cooling equipment, seals, and bearing drivers
• Perform routine maintenance activities such as cutting, welding, heating, and cooling of materials
• Diagnoses Engine and engine support systems, hydraulic, hydrostatic, and pneumatic systems, Drive train systems, Steering, Suspension, Brake System, Wheel Assemblies, and Undercarriage, Electrical and Vehicle Management Systems, and Environmental Control Systems
• Complete Timesheets timely

We are a Talent Acquisition Consultancy focusing on the Oil & Energy industry, is currently seeking a highly experienced Senior Rotating Engineer to join their team. As part of our global reach and network, the Senior Rotating Engineer will play a key role in providing outstanding recruitment solutions, identifying high potential professionals with sophisticated skills from different industries such as Oil & Gas, Petroleum, Infrastructure, Energy, Water, Transportation, Science & Technology and Health Care. The ideal candidate will have an extensive background in the Oil & Energy industry and will play a key role in driving the success of Eram Talent.

Responsibilities

• Design, implement and maintain rotating equipment, including pumps, compressors, turbines, and engines
• Develop and oversee maintenance programs and procedures to ensure optimal equipment performance
• Conduct routine inspections and maintenance of equipment to identify and address issues before they become major problems
• Collaborate with cross-functional teams to develop and execute equipment improvement projects
• Provide technical expertise and guidance to junior engineers and technicians
• Ensure compliance with industry regulations and standards
• Develop and maintain relationships with key stakeholders and vendors

• Bachelor's degree in Mechanical Engineering
• BS in Mechanical Engineering + 10 years of experience + 5 years as Mechanical Rotating Engineer
• At least 5+ years of experience in rotating equipment engineering in the Oil & Energy industry
• Strong technical knowledge of rotating equipment design, operation, maintenance, and troubleshooting
• Demonstrated experience leading successful equipment improvement projects
• Excellent communication skills and the ability to collaborate with cross-functional teams
• Strong analytical skills and attention to detail
• Experience working in a fast-paced, deadline-driven environment

You can also apply for the Job position by clicking the link below.

https://forms.gle/PaPUU8MWM8QzkzdH8